Basic Info.
Material
Tungsten Carbide
Processing Methods
Cutting Tooth File
Tooth Pattern
Single-tooth Pattern
Quality
Good Performance and Stable Quality
Product Description
We have:
Rotary Tungsten Carbide Burrs
tungsten carbide burrs
tungsten carbide rotary burrs
double blade tungsten carbide burrs
single blade tungsten carbide burrs
YG8 tungsten carbide burrs
YG6X tungsten carbide burrs
Tungsten carbide burrs for steel
Tungsten carbide burrs for stainless steel
Type-A tungsten carbide burrs
Tungsten Steel Carbide Burs for High speed Handpiece FG-701
Dental Tungsten Carbide Burs Polishing Tips 2.35mm For Polisher Handpiece
Cylinder Shape Double Cut Carbide Bur
Single Cut Tungsten Carbide Bur Cutting Tool
Double Cut Tungsten Carbide Bur Cutting Tool
Burr Abrasive Flame Shape NEW
TUNGSTEN CARBIDE BURS 1/8" SHANK 4062 C Cross Cut
Cross cut tungsten carbide burrs
Double Cut Tungsten Carbide Bur Cutting Tool Burr Abrasive Egg Shape
Tungsten Carbide Burs Round
Tungsten Carbide Burs Flat Fissure
Tungsten Carbide Burs Round Cylinder
Tungsten Carbide Burs Taper Fissure
Tungsten Carbide Burs Round Cylinder
Tungsten Carbide Burs Round End Fissure
Tungsten Carbide Burs Round Crosscut
Tungsten Carbide Burs Flat Fissure Crosscut
Tungsten Carbide Burs Round Cylinder Crosscut
Tungsten Carbide Burs Taper Fissure Crosscut
Tungsten Carbide Burs Round Cylinder Crosscut
Tungsten Carbide Burs Round End Fissure Crosscut
Our tungsten carbide burrs Characteristic:
1) 100% virgin material
2) Long use lifetime and perfect performance
3) Low cutting forces
4) The complete range available from stock
5)Samples available
Advantage:
The carbide rotary burrs are the fitter and mold labor's indispensable advanced tool.The characteristic is substitutes for the belt handle small grinding wheel and the non-dust pollution, the service life is equal to several hundred belt handle small grinding wheel,the processing effeciency enhances above 5 times,below abrasive machining degree of hardness HRC70 each metal and the monmetallic material,grinding surface roughness may reach Ral.6, convenience grasps, use to be simple,safe reliable, reduces the arduous manual labor greatly,reduce the cost of production.
Application:
The carbide rotary burrs are extremely widespread,appies in the mold processing manufacture. Machine parts bevel edge,inverted round and trench processing.The clean-up casting, forging,weldment's edge, burr and welded joint; pipeline,impeller passage's light entire processing,metal and nonmetallic material(bone jade.stone) industrial art carving.
Usage:
The carbide rotary burrs main supporting the use of electric tool or the pneumatic tool(may also install on machine tools). General support for the drive rotational speed is 6000-50000 turn/min.
All ZZ Hardmetal burrs come:
Optimized end cut design and extremely smooth surface finishing (mirror finish) leads to excellent chip removal.
The complete range available from stock .
Only Virgin material are used.
All burrs are 100% braze tested for strength and safety.
Carbide grade and properties
GradeBinder %Hardness(HRA)TRS(N/mm2)
YG6X6.091.51800
YG66.090.51900
YG88.089.52200
Tungsten Carbide Burs
ZZ Hardmetal tungsten carbide burs are designed for machining materials of virtually any strength. The perfect combination of tungsten carbide, shape and cut geometry and, if required, coatings, makes this possible. ZZ Hardmetal burs are internationally known for highest possible levels of concentricity and consistency. The resulting balance and performance provides many user advantages.
Cylindrical (Plain End) - Shape A
Cylindrical bur with plain end (uncut)
1/8" Shank Diameter
1/4" Shank Diameter
1/8" Extended Shank L2 (2")
1/8" Extended Shank L3 (3")
1/4" Extended Shank L6 (6")
Cylindrical (End Cut) - Shape B
Cylindrical bur with end cut.
1/8" Shank Diameter
1/4" Shank Diameter
1/4" Extended Shank L6 (6")
Cylindrical (Radius End) - Shape C
Cylindrical bur with radius end.
3/32" Shank Diameter
1/8" Shank Diameter
1/8" Extended Shank L2 (2")
1/8" Extended Shank L3 (3")
1/4" Extended Shank L6 (6")
Ball - Shape D
Ball-shaped bur.
1/8" Shank Diameter
1/4" Shank Diameter
1/8" Extended Shank L2 (2")
1/8" Extended Shank L3 (3")
1/4" Extended Shank L6 (6")
Oval - Shape E
Oval-shaped bur.
1/8" Shank Diameter
1/4" Shank Diameter
1/8" Extended Shank L2 (2")
1/8" Extended Shank L3 (3")
1/4" Extended Shank L6 (6")
Tree (Radius End) - Shape F
Tree-shaped bur with radius end.
1/8" Shank Diameter
1/4" Shank Diameter
1/8" Extended Shank L2 (2")
1/8" Extended Shank L3 (3")
1/4" Extended Shank L6 (6")
Tree (Pointed End) - Shape G
Tree-shaped bur with pointed end.
1/8" Shank Diameter
1/4" Shank Diameter
1/8" Extended Shank L2 (2")
1/8" Extended Shank L3 (3")
1/4" Extended Shank L6 (6")
Flame - Shape H
Flame-shaped bur.
1/8" Shank Diameter
1/4" Shank Diameter
1/8" Extended Shank L2 (2")
1/8" Extended Shank L3 (3")
1/4" Extended Shank L6 (6")
60° Cone - Shape J
These burs are flatter and less acute-angled. 60º cone shape.
1/8" Shank Diameter (Double Ended)
1/4" Shank Diameter
90° Cone - Shape K
These burs are flatter and less acute-angled. 90º cone shape.
1/8" Shank Diameter (Double Ended)
1/4" Shank Diameter
14° Taper (Radius End) - Shape L
Taper bur with radius end.
1/8" Shank Diameter
1/4" Shank Diameter
1/8" Extended Shank L2 (2")
1/8" Extended Shank L3 (3")
1/4" Extended Shank L6 (6")
Cone - Shape M
Conical bur with flattened tip.
1/8" Shank Diameter
1/4" Shank Diameter
1/8" Extended Shank L2 (2")
1/8" Extended Shank L3 (3")
Inverted Cone - Shape N
Inverted cone bur, tapering off towards the shank.
1/8" Shank Diameter
1/4" Shank Diameter
Inverted Cone (End Cut) - Shape N
Inverted cone bur, tapering off towards the shank, with end cut.
1/8" Shank Diameter
1/4" Shank Diameter
Tungsten Carbide Burs for Aluminum and Non-Ferrous Metals
ZZ Hardmetal has optimized the ALU cut especially for stock removal of aluminum. This cut is characterized by its high stock removal performance on all grades of aluminum. ALU Cut provides reduced loading, long tool life, large chip volume and high stock removal performance. ALU PLUS Cut is designed for maximum stock removal of non-ferrous metals, brass, copper, hard aluminum alloys, plastics, fibre-reinforced plastics and rubber.
ZZ HARDMETAL established in 2007, as a big and famous manufacturer in Zhuzhou,China. We produce various kinds of tungsten carbide products,including carbide inserts,carbide rods,carbide tips, carbide strips, carbide plates,carbide wire drawing dies, carbide cold forging dies, carbide punches, woodworking tools,mining drill bits,carbide buttons,etc.
Our customers spread all over 70 countries. We provide our customers the carbide products with good quality,competitive price,fast delivery time and reliable after sale service. To your reference, you can check more items from our website: zzhardmetal.en.made-in-china.com
Address:
No. 475, Jinshan Road, Hetang District, Hunan P. R, Zhuzhou, Hunan, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Agriculture & Food, Auto, Motorcycle Parts & Accessories, Construction & Decoration, Furniture, Health & Medicine, Industrial Equipment & Components, Instruments & Meters, Manufacturing & Processing Machinery, Security & Protection, Tools & Hardware
Management System Certification:
ISO 9001
Company Introduction:
ZZ HARDMETAL was established in the year of 2007, We are specialized in tungsten carbide marketing over ten years. With stable products quality, professional service, competitive prices, our customers range over 50 countries and regions. <br><br>In the year of 2010, we set up our first Branch Company----ZZ WIDIA in Sao Paul, Brazil. Now ZZ WIDIA is the Sole Agent of several Chinese T-C factories in Brazil, The regular stock products include: Indexable inserts, end mills, cold forging dies, tungsten carbide strips and so on. <br><br>We have our own Lab for inspection and we are holding a tungsten carbide factory: Zhuzhou Old Craftsman Precision Carbide Co., Ltd, and at the same time, we have shares in several tungsten carbide factories and Precision-Processing factories, we had already built a very nice long-terms business relationship with lots of tungsten carbide enterprises. <br><br>We are familiar with almost all the products related to tungsten carbide, and we have very rich stock of moulds for production. Especially for Precision Processing products, customized products, products with special materials request, Tungsten carbide welding products and so on, we have unique advantage to produce<br><br>We are a professional Chinese manufacturer of tungsten carbide products. We work with nine cemented carbide factories by joint stock method. Each factory has their strongpoint products. <br><br>Factory 1: Inserts, shims, woodworking tools, saw tips, percussive drill tip. <br><br>Factory 2: Cold forging dies, carbide disc, carbide mining bits, plates, carbide tyre nailFactory 3: Carbide drawing dies. <br><br>Factory 4: Carbide burrs. <br><br>Factory 5: Carbide rods, carbide bars<br><br>Factory 6: Carbide balls & Seats. <br><br>Factory 7: Carbide ceramic tile cutter. <br><br>Factory 8: Mining tools<br><br>Factory 9: Carbide powder<br><br>Depending on our talented engineers and skillful workers, we always provide our customers the products with good quality, competitive price, fast turnaround and reliable after sales service. <br><br>We own the specialized export company - Zhuzhou ZZ Import and Export Co., Ltd. Our products are exported to USA, Europe, etc. And got trust from our customers. Along with our company growth, we hope to build business with more company abroad. <br><br>My company export more than USD5, 000, 000 every year, have more than 300 cusotmers and many customers long term cooperation. <br><br>We ensure, based on my company high quality and service, you will never regret to choose my company. <br><br>We are waiting for you.